服务热线
15821301036
产品展示
products
联系我们
CONTACT US

上海源祁精密机械有限公司
上海市奉贤区南桥镇望园南路1588弄绿地未来中心A1号2208室
联系人:罗先生
电话:15821301036
网址:www.sh-yuanqi.cn
邮箱:andrey_luo@126.com

产品展示
你所在的位置:网站首页>产品展示
方形平板气浮支撑

HIGH PRESSURE CAPABILITY(高压能力)

MAGER’s flat air bearings, for special applications,can be supplied with higher pressure (up to 12 bar, and more in special cases) with proportional increase in load and stiffness  

MAGER的特殊应用的平面空气轴承可以提供更高的压力(最高12 bar,在特殊情况下更高),从而按比例增加载荷和刚度

due to structural fragility, 7 bar is the supply pressure limit of porous bearing

                                                                     由于结构脆弱性,多孔质空气轴承的供应压力极限为7 bar




HIGHER PERFORMANCES(更高的性能)

Most part of the MAGER’s flat air bearings have higher load and stiffness performances, at higher air gap, so they can work safer in operative conditions.

Big advantage, for example, in CMM applications. 

MAGER的大多数平面空气轴承在较高的气隙下具有高的载荷和刚度性能,因此在操作条件下可以更安全地工作。例如在三坐标中有很大的优势。

                                                                 porous media air bearing cannot work at high air gap

                                                                                                                              多孔质空气轴承不能在大气隙下工作




AIR GAP SENSOR(气隙传感器)

In MAGER’s flat air bearings, easy, cheap and efficient integrated air gap sensors(working on pneumatic principle) can be introduced, with the aim to ease air gap calibration during set-up procedures, and to constantly check the height of the air gap during operation, preventing from malfunctioning due to external events.

在MAGER的平面空气轴承中,可以引入简便,廉价和高效的集成气隙传感器(基于气动原理),以简化设置过程中的气隙校准,并在安装过程中不断检查气隙高度,防止由于外部事件导致的故障。

微信图片_20210309182901.png



EASY TO BE CLEANED

In case of failure of the pneumatic supply, with dust and oil reaching the air bearings system, MAGER’s air pads can be easily cleaned.

如果气动供应出现故障,灰尘和油会进入空气轴承系统,则MAGER的气垫也便于清理

porous media cannot be easily cleaned from fine dust and oil

多孔质空气轴承不易清除细小的灰尘和油污


|网站首页|公司简介|产品展示|案例展示|联系我们|
版权所有 上海源祁精密机械有限公司 沪ICP备19045564号-1